• Welcome to Regional Training Center - Talisay

    RTC Talisay Facade

    “The Regional Training Center – Talisay is one of the ten skills center established by the Government in affirmation of its commitment to the development of the country’s manpower resources. Financed by a loan from the International Bank for Reconstruction and Development, it was built by the Department of Education and Culture through the Education Projects Implementing Tasks Force on a 3.2 hectare site donated by the Provincial Government of Negros Occidental to the National Manpower and Youth Council. The building was completed on April 15, 1977 and inaugurated on September 2, 1977 by Imee R. Marcos. As of July 2022, RTC Talisay has 21 registered programs and 32 assessment centers. The Center is manned by 13 regular staffs and 15 support staffs and operating with a budget of 1.6 million a year.” 




Available courses

The AUTOMOTIVE SERVICING NC I Qualification consist of competencies that a person must achieve to perform basic engine servicing, removal and installation of vehicle components for both diesel and gasoline-engine powered vehicles.


 A person who has achieved this Qualification is competent to be:
• Automotive Mechanic Assistant
• Automotive Junior Mechanic

Automotive 1

The AUTOMOTIVE SERVICING NC II Qualification consists of competencies that a person must achieve to inspect, clean and repair mechanical or electrical parts, components, assemblies and sub-assemblies of light and heavy-duty automotive vehicle with diesel or gas engine in accordance with manufacturer’s specification. It also covers servicing of engine mechanical components such as cooling and lubricating system; performing power train and underchassis servicing and repair.

A person who has achieved this Qualification is competent to be: 

  •  Automotive Mechanic 
  •  Automotive Service Technician

Automotive Course

The CARPENTRY NC II Qualification consists of competencies that a person must achieve that will enable him/her to perform fabrication, installation and stripping of formworks, its components and supports.

A person who has achieved this Qualification is competent to be:
• Rough Carpenter

Carpentry

The COMPUTER SYSTEMS SERVICING NC II Qualification consists of competencies that must possess to enable to install and configure computers systems, set-up computer networks and servers and to maintain and repair computer systems and networks.

A person who has achieved this Qualification is competent to be: 

  •  Computer Assembler 
  •  Computer Service Technician 
  •  Network Technician 
  • Computer Maintenance Technician

CSS

The Construction Painting NC II Qualification consists of competencies that a person must achieve that will enable him / her to prepare tools, painting materials and equipment; prepare surfaces (wood, concrete, drywall and metal) for painting and assembling access equipment; and perform painting work.

A person who has achieved this Qualification is competent to be a: 

  • Construction Painter

Cons. Painting

The COOKERY NC II Qualification consists of competencies that a person must achieve to clean kitchen areas, prepare hot, cold meals and desserts for guests in various food and beverage service facilities.

A person who has achieved this qualification and awarded National Certificate (NC) is competent to be employed in any of the following positions in the Garde Manger, Pastry or in the Hot Kitchen Section as Cook or Commis and Assistant Cook.

Cookery

The DRIVING NC II Qualification consists of competencies that a person must achieve to operate light motor vehicles classified under LTO Restriction code 1 and 2; transport passengers and loads over specified routes to local or district location and collect fare duly authorized by the relevant government agency; comply with local traffic rules and regulations and perform minor vehicle repairs and other minor servicing.

A person who has achieved this Qualification is competent to be:

• Professional Driver
• Light Vehicle Drive

Driving

The Electrical Installation and Maintenance NC II Qualification consists of competencies that a person must achieve to enable him/her to install and maintain electrical wiring, lighting and related equipment and systems where the voltage does not exceed 600 volts in residential houses/buildings.

A person who has achieved this Qualification is competent to be: 

  • Building-Wiring Electrician 
  •  Residential/Commercial-Wiring Electrician 
  •  Maintenance Electrician

EIM

The ELECTRONIC PRODUCTS ASSEMBLY AND SERVICING NC II Qualification consists of competencies that a person must possess to assemble electronic products, prepare printed circuit boards (PCB) modules and to install and service consumer and industrial electronic products and systems.

A person who has achieved this Qualification is competent to be: 

  • Electronic Products Assembler 
  • Domestic Appliance Service Technician
  • Audio-Video Service Technician
  • Industrial Electronic Technician
  • Electronic Production Line Assembler
  • Factory Production Worker

EPAS

The HEAVY EQUIPMENT OPERATION (BULLDOZER) NC II qualification consists of competencies that workers must achieve to enable them to perform tasks such as excavating, dozing, ripping, winching, and clearing of earth materials in construction sites or other locations.

A person who has achieved this Qualification is competent to be a:

  •  Bulldozer operator

Bulldozer

The HEAVY EQUIPMENT OPERATION (FORKLIFT) NC II qualification consists of competencies that workers must achieve to enable them to perform tasks such as inspection, basic preventive maintenance, lifting and handling of loads in construction sites or other locations with the use of a forklift.

A person who has achieved this Qualification is competent to be a:

  • Forklift operator

Forklift

The HEAVY EQUIPMENT OPERATION (HYDRAULIC EXCAVATOR) NC II qualification consists of competencies that workers must achieve to enable them to perform tasks such as inspection, basic preventive maintenance, excavating, trenching, leveling, loading and lifting of materials in construction sites or other locations with the use of a hydraulic excavator for both wheel and crawler types.

A person who has achieved this Qualification is competent to be a – 

  • Hydraulic excavator operator

Excavator

The HEAVY-EQUIPMENT OPERATION (WHEEL LOADER) NC II qualification consists of competencies that workers must achieve to enable them to perform tasks such as loading, carrying, dumping and / or stockpiling of earth and other materials in construction or mining sites or other locations with the use of wheel loader.

A person who has achieved this Qualification is competent to be a – 

  • Wheel-loader operator
  • Wheel Loader

Landscape Installation and Maintenance NC II consists of competencies that a person must achieve in installing and maintaining landscape designs for all types of development projects including residential, commercial, industrial, institutional and open space areas. It also includes competency in growing plants and trees with a goal of creating beautiful and environmentally healthy landscapes. Workers at this level will be working under the supervision of landscape supervisor / manager

A person who has achieved this Qualification is competent to be: 

  • Landscape Gardener

Land Scape

The Machining NC I Qualification consists of competencies that a person must achieve to perform basic set up and operate a variety of machine tools to perform precision machining operations.

A person who has achieved this qualification is competent to be: 

  • Machinist
  • Machinist helper
  • Bench worker/fitter
  • Lathe machine operator
  • Milling machine operator
  • Grinding machine operator
  • Shaper machine operator

Machinist 1

The Machining NC II Qualification consists of competencies that a person must achieve to set up and operate a variety of machine tools to perform precision machining operations.

A person who has achieved this qualification is competent to be: 

  • Machinist
  • Lathe operator
  • Milling machine operator
  • Precision grinding machine operator
  • Bench worker/fitter

Machinist 2

The Pipefitting NC II Qualification consists of competencies that a person must achieve to enable him to cut, bevel and / or thread pipes, install overhead and underground piping system, fabricate support and hangers and perform tack welding.

A person who has achieved this Qualification is competent to be:
• Pipe fitter

Pipefitting

The Shielded Metal Arc Welding NC I (SMAW) Qualification consists of competencies that a person must achieve to weld carbon steel plates components as specified by layout, blueprints, diagrams, work order, welding procedure or oral instructions using SMAW welding equipment.

This Qualification conforms with AWS D 1.1 Structural Welding Code; ASME IX Boiler and Pressure Vessel Code; API 1104 Code for Gas and Oil Pipeline Facilities; and ISO 9606-1 Qualification of Welders for Steel.

A person who has achieved this Qualification is competent to be: 

  • Plate Welder (SMAW)
  • SMAW 1

The Shielded Metal Arc Welding (SMAW) NC II Qualification consists of competencies that a person must achieve to weld carbon steel plate and pipe components as specified by layout, blueprints, diagrams, work order, welding procedure or oral instructions using shielded metal arc welding equipment. 

This Qualification conforms with American Welding Society (AWS) D 1.1 Structural Welding Code; American Society of Mechanical Engineers (ASME) IX Boiler and Pressure Vessel Code; American Petroleum Institute (API) 1104 Code for Gas and Oil Pipeline Facilities; and International Standards Organization (ISO) 9606- 1 Qualification of Welders for Steel.

A person who has achieved this Qualification is competent to be:

  • SMAW Welder

Related image

The TILE SETTING NC II Qualification consists of competencies that a person must achieve to enable him / her to lay tiles on plain and curved surfaces for walls, floors and other application and repair of tiles on plain and curved surfaces.

A person who has achieved this Qualification is competent to be a -

  • Tile Setter

Tile Setting

This course is designed to enhance the knowledge, skills, positive attitude and work values of the learner in accordance with the prevailing standards in the Technical -Vocational Education and Training (TVET) sector.  This encompasses competencies required of a Technical-Vocational Trainer to perform the tasks in the areas of instructional delivery / facilitation, competency assessment, and maintenance of training resources / facilities.

A person who has achieved this Qualification is competent to be:
  • TVET Trainer/Technical Trainer
  • Training Facilitator/Coordinator
  • Competency Assessor

TM 1